CBM CBM1000 Instrucciones de operaciones descargar pdf (Pagina 153)

— 135 —

• When the XON/XOFF control is selected, all the codes are sent

continuously without verifying that the host can receive the

data. Data that has been sent is always continuous except for

the XOFF code.

• When parallel interface is used, the size of the buffer for

sending data (The buffer that stores all data to be sent except

for ASB status) is 99 bytes. Data which exceeds 99 bytes, will

be discarded.

• Data can be written into the download user NV memory using

the FS g3 command.

• There may be a delay between receiving this command and

storing the data depending on the state of the receiving buffer.

[Caution] • After the header is sent, all data will be sent without verifying

whether the host can receive the data or not. Therefore, the

available space in the receiving buffer of the host should be

more than (The number of sent data+2) in order not to lose

data during the execution of this command.

• While data is being sent, real time commands (Commands

with a DLE extension) will be ignored. And even if the ASB

function is validly selected, ASB status will not be sent while

data is in the process of being sent. Therefore, it is not possible

to check the change in the printer state by checking its status.

The user must pay attention to this.

[Reference] FS g3

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 229 230

Sin comentarios

CBM CBM1000 Instrucciones de operaciones Pagina 153